RFID Technology to Build Intelligent Logistic Distribution Center

The distribution center is logistics place or organization engaged for distribution business. The establishment of the distribution center is mainly to achieve the distribution of logistics.
For Traditional distribution center, they usually have problems below:
1. Inventory statistics lack accuracy
2. Cargo loss
3. Difficult for inventory
4. High labor cost


For these problems, let's talk about how to apply RFID technology in the distribution center.


1. Warehousing and inspection
When the goods with RFID tags arrived at the distribution center, the fixed RFID reader automatically read the label at the entrance, and the management system will automatically update the inventory list. At the same time, according to the needs of the order, deliver goods to the right place. Clou's 4-ports fixed UHF reader could support over 200 tags multi-reading and distance up to 15m, perfectly meet the needs.

2. Outbound transport
Cargo transport will achieve a high degree of automation with RFID. When the goods in the distribution center out of the factory, within the valid range of the RFID reader, the reader automatically read the goods on the label information, do not need to scan, you can directly out of the goods shipped to the retailer's hands. Clou's CL7206B2, outdoor IP66 RFID reader with WiFi, Bluetooth, and RS232/RS485/RJ45 interfaces, would be your best choice.

The New Route for Evacuation: RFID UHF Tech Helps to Increase safety

With the development of economy and technology, many thing has used the high-tech to control the development of event. Efficiently coordinated evacuation is a key for health and life of employees. While the best methods are still being looked for, RFID UHF is a common solution. It offers new approach for evacuating workers from endangered areas

Nowadays, because manual counting is imprecise, many factory are faced with some danger. Time-consuming and it is easy to make serious mistake with it. The other popular evacuation way is identifying workers with their touchless cards. However, in the moment of general chaos and hurry one can just forget to take it. What’s more, if every employee wants to use his or her card in the same moment, then surely there would be some disarray. Precious time is lost.

RFID UHF to save your Time.
According to all indications, it seems that there is an efficient method for safe evacuation: it is a wireless technology RFID UHF. It is interesting that despite RFID itself was developed during IIWW for identification of enemy airplanes, new way for its usage are still discovered. One of such fresh idea for RFID implementation has been just recently proposed by Smart Technology Group.
RFID characteristics makes it perfect for evacuation. Why? It can precisely identify simultaneously up to 300 tagged people or items – just in one second. There is no need for visual contact between RFID reader and tags. They do not need to be put to reader. Instead, they can be hidden under working clothes, in pocket or in bag. Tags themselves come in various size and shape. Shape modification does not change tags functionality.

RFID UHF to increase your safety
When the factory is faced with trouble,  Many factor will be going to escape.  The RFID UHF will read the tag.  Then the system staff will know who has not go out, where he is.
To some extent,  some danger has reduced.


It is logical to say that RFID UHF answers all evacuation challenges. It offers solutions that eliminate today’s disadvantages in evacuation coordination. It is interesting and valuable alternative for the most popular methods. And what’s more, it is perfectly matched with law regulations. It is becoming more common to demand from employers that they use technological solutions which make precise and instant identification possible. RFID UHF suits such requirements perfectly.


Related Reading:Mid-Range UHF RFID Reader,Passive UHF RFID Tags,UHF RFID Handheld Reader


Notice：Copyright for Jietong all, reproduced please inform

RFID Technology Makes Parking Easier

RFID(Radio Frequency Identification) technology has been widely used in warehouse logistics, retail management, asset management, production&processing etc. But recently, ITS(Intelligent Traffic System)develops into one of the most popular application area for its huge market capacity and the relevance of national conditions. Furthermore, RFID technology has been infiltrated into various sub-fields of ITS, including Traffic Management System, Traffic Information System, Vehicle Control System, Public Transport System, Commercial Vehicle Operation Management System and Automated Highway System.

There’s another sub-filed called Intelligent RFID Parking System, like a access control system for parking lot, that provides a modern management solution for the traditional parking lots to improve working efficiency, corporate image and customer satisfaction. Because the traditional parking lots have many problems and limitations for further development, we have to do more on this under the current situation.


With the development of society and improvement of living level, the number of cars has been drastic increased during recent years. Both city and property management departments face the same problem from that. It will be difficult for people to park or to find their cars in a large parking lot. And much time would be wasted on that. Because all traditional parking lots are operated with human staffs and the system is not stable enough for long-time use. Car-owners also need to swipe card by themselves when they in and out.

To solve this problem, Shenzhen Clou IoT Technologies Co., Ltd. has developed a reliable Intelligent RFID Parking System and got much experience about it. With the use of high-performance UHF RFID Readers(with a 0-20m long reading range) and Tags that researched and produced by Clou IoT, this Intelligent RFID Parking System can help you to collect, record and recognize the data information of cars in and out. Then this system will take some related actions, like cars release and car’s information record etc. By this way, the process flow will be simplified and the time of cars in and out will be reduced. Also, you need not to worry about the mistakes caused by human staffs or the safety of cars parked at your place. Lower operation costs and higher working efficiency. That would be great for both property management department and car-owners both.

In the future, Shenzhen Clou IoT Technologies Co., Ltd. will keep developing more solutions about ITS for customers to solve the most practical problem.

Electronic Animal Ear Tags-Using For Health

In recent years, major domestic and foreign animal diseases continue to occur in a wide range of complex diseases, the epidemic prevention task is heavy. This direct impact on livestock production, animal safety and human health and also caused huge economic losses to animal husbandry. The spread of animal disease cannot be ignored. In order to realize modernization management of the livestock sector, to ensure the quality of animal products, the company recommended for intelligent electronic animal ear tags, which can achieve scientific animal husbandry, institutionalization, improve livestock management level.

This type of animal tags are mainly used for collecting data after the management of livestock various information, so you can record information from birth to a livestock, it is easy to master the management of livestock. Each animal ear tag and its varieties, sources, immune status, health status, date of birth, color, pet owners together with other information to manage, once the epidemic and livestock products quality problems, can trace its origin.

Animal Ear tag is specifically designed for the livestock breeding system work. The exterior is attractive, durable; intuitive software operation, convenient. chip production to ensure product reliability. The system need wiring, greatly reducing system cost. System is mainly composed of an electronic ear tags, readers, data processors. Pet owners only need to carry wireless handheld terminals, readers of the need to keep track of livestock ear tags, you can query the relevant information about the animals. Convenient and save a lot of time, without having to look up the card file original hand-prepared.

The system structure and introduction

1. The system structure

(1) Hardware device: electronic ear tags, readers, ear tag pliers

(2) System Software: Livestock Information Management System electronic ear tags

2. Introduction

Electronic ear tag refers built-in electronic chip and antenna, may be applied to livestock ear, and used to prove the identity of livestock, livestock identification  ear tag markers bearing individual information. It mainly consists of primary and secondary standard two parts. Reading distance 2-8cm, outside package using a variety of materials, with shock, waterproof, anti-corrosion properties.

3. Advantage

1) The system requires no wiring, installation is simple

2) Inductive data collection, simple operation, more convenient. Just to data collection in the vicinity of radio frequency electronic tags gently flash, you can read the basic information and characteristics of livestock. Data and information obtained will not destruction and modification;

3) Radio frequency electronic tags with a high temperature, antifreeze, waterproof, anti-magnetic, normal work under their harsh environment;

4) For livestock tracking management, once the epidemic and livestock quality problems occur, they can trace their origin

If you want to have some of the animal livestock ear tags for your business or farm, come and visit http://www.xccrfid.com/, we can provide large amount for you!

Related Reading: sheep id RFID tags, RFID racing pigeon rings, rfid ear tags for cattle

Introduction the Difference of RFID Tags

You may confuse about the difference of UHF RFID tags and LF and HF RFID tags. And today I’ll tell you.

UHF RFID tags (UHF):

UHF RFID tags referred to as microwave radio frequency tag and microwave frequency bands commonly used electromagnetic emission principle.

Size (mm): 112*24 mm, 50*25mm

Protocol: ISO18000-6C

Material: Polystyrene

Frequency: 860-960MHz

Chip options: Alien H3, Impinj M4

Write cycles: 100,000pcs

Protection level: IP 54

Application: Widely used in inventory control of expensive electronic assets, supply chains that use metal carts, tracking of metal tools, and warehouses with metal racks could all benefit.

Mode: read-write

1. Passive UHF RFID tag long range distance, up to 10 meters.

2. UHF role in a wide range is the most advanced networking technologies are using UHF RFID technology.

3. To transfer data faster, per single tag read rate of up to 170 / sec

4. The label store large volumes of data.

5. UHF RFID flexibility can be identified easily obtained.

6. The high data transfer rate, in a very short period of time a large number of electronic tags can be read.

7. The anti-collision mechanism for multi-tag read, a single batch can read multiple RFID tags.

8. The electronic tag antenna is usually long and label shape. Linear and circular polarization antenna has two designs to meet the needs of different applications.

9. The handheld reader for UHF RFID tags can be read or written.

10. A handheld reader for UHF RFID tags can be batch operation.

11. Handheld reader with CE operating system read UHF RFID data, through WIFI, GPRS real time upload to the back-end database.

12. Handheld reader quite a PDA computer, by reading UHF electronic tag data read and write operation can be completed in handheld readers and hand-held reader can instantly query tag data. (Such as manufacturer information, batch number, production date, etc.)

13. UHF RFID tags with a global unique ID number, security is strong, not easy to crack.

Low-frequency (LF) and high frequency (HF) RFID Tags

This kind of RFID tags commonly used electromagnetic coupling principle like LF cattle RFID bolus. High frequency typical operating frequency is 13.56MHz. The band RF tag, because the low-frequency tag works exactly the same principle, namely by inductively coupled manner, so should be classified as low-frequency tag class. On the other hand, according to the general division of radio frequencies, also known as high-frequency band of its work, it is also often referred to as high-frequency tags.

Specification:

1. The effect of low frequency range is now mainly used in the technical field within the low end of the range, such as automatic parking fees and vehicle management systems.

2. The data transfer speed is slow.

3. The label store less data.

4. Low frequency electronic tags inflexible cannot easily be identified.

5. The data transmission rate is low, in a short time can only read one tag.

6. Only suitable for low-speed, close-recognition applications.

7. Compared with the ultra-high frequency electronic tags, tag antenna turns more and higher costs of some.

8. Only one read electronic tag data read.

9. A hand-held reader can query data in real time.

If you have interested in RFID tags of various band, you can visithttp://www.xccrfid.com/ to find more. You won’t be regret.

Related Reading: UHF RFID Etched Aluminum Inlay, Long range UHF tag, passive printable CD labels

Tell You Something about RFID Tags Nowadays

When talking about RFID laundry tags, people always thinks that it is complex. But that is for the producer. And for customers, it is easy to using and benefit for times. Find great RFID products through the ISO9001 quality system certification, and access to advanced technology enterprises may help customers buy tags and inlay more rest assured.

Compared with the traditional label products, paper to the volume of materials based on RFID tag production process to be complicated. First, the product specifications have very stringent requirements, must meet the global standards for RFID tags. In addition, the volume cannot have joint ticket; it cannot be replaced after complex, which made the product yield a very high demand. RFID tag production another feature is the need for double-sided die, the label will have a positive die, easy to paste it ripped luggage at the same time, it has a reverse side of the die. This particular structure can lead to the production of waste with labels replace hand luggage tag, to replace the label with the antenna, the paper tickets will be disconnected from the back of the die Department. In addition, RFID tags increase productivity, reduce production costs is a challenge.

Through UHF RFID tags production process in-depth research and RFID products at home and abroad a comprehensive comparison of composite packaging equipment, RFID baggage provided by the production of composite packaging solutions.

RFID processing equipment in all industries has very complete application solutions, and to excellence Design Concepts and stable product quality has won wide praise.

In the equipment selection process in addition to wonderful Company taking into account the good reputation and RFID equipment success story in China, chose to promote the introduction of line the main reason for better or wonderful RFID tags to solve the production problems that existed in the process.

First, RFID tag line used magic "Dry Inlay screening process" to ensure the finished product volume. Inlay is the so-called dry patches down the package equipment directly produced without any rubber membrane Inlay, Inlay is so wet behind Inlay with silicone rubber is attached to the intermediate products formed on paper. Technical characteristics of equipment that is directly combined with a dry Inlay, not only double the production capacity, and do not require use of silicone oil after dry Inlay indirect production costs of paper, effectively reducing the cost of RFID product.

"Dry Inlay screening process" refers to the volume of dry Inlay in place after the Council passed the test station positioning in the vacuum drum, cutting, good Inlay composite surface material on the label, but fail in a vacuum drum through Inlay the greater the angle of rotation, emission by vacuum suction, so that you can remove the waste out. This will greatly improve the yield RFID products and save on the label of failure Inlay material loss, to a certain extent, reduce the production cost of RFID products.

Followed by multi-channel parallel production, maximize productivity. RFID products are a lot of processing equipment is the single-channel production, and RFID composite multi-channel parallel processing equipment produced a good solution to this issue, which devices the growth of RFID Laundry tagproduction capacity while reducing production costs.

With the global economy recovers and the warmer the air transport industry as a whole, the domestic production of RFID tags processing market opportunities, firm size and efficiency in glory. After years of RFID investment, China has completed the RFID products and processes in terms of technology accumulation, and the trial was successful for RFID laundry tags. More info, click: http://www.xccrfid.com/.

Related Reading: industrial RFID tags, passive printable CD labels, contactless proximity cards

Introduction about Contact PVC IC cards

Nowadays information sharing, technology increasing, and even check ourselves not from the real person but the information card. This kind of Contact PVC IC cards with chip use more and more popular, some place like hotel or meeting, the card just like you, and your information are there to match whether you are the correct person.

1. The ID card it is a kind of IC card, the card can modify any sector, as M1 copy daughter card, mainly used in IC card copy. Great Contact IC card are made of green material in high quality which safe to human like PVC, PET, PETG and ABS. and the normal size is 85.5*54mm and 0.84mm in thickness.

Some Specification of quality IC cards:

Surface: Glossy/Matte/Frosted

Printing: Full color offset printing, Silk-screen print, Silver/Gold silk-screen printing

Additional Craft: Numbering: Convex code

Application: School, Park, Bus etc.

1). the card is fully compatible with 1K Mifare card.

2). the block of the card can be modified, repeat modification.

3). block directly with the ordinary Mifare reader to read and write, do not need special equipment.

2. What is the difference between an ordinary card UID cards?

Uid card is a compatible with the M1 card special cards, such cards in M1 (ordinary) card based on the breakthrough of the M1 card uid area (sector 0 block) cannot write the limit can use card maker IC card copy analysis tool, Caron card "function clone a and the original card exactly the same target card. Mainly for the binding of UID number of IC card application.

MF Proximity Classic Card Readers does not have the function of UID card, but can use the IC card to analyze the "data replication" function, the original card in addition to the UID area (0 sector 0) all the data into the target card.

XCC RFID is one of the largest manufacturers of RFID transponders in Guangdong province, China. As a high tech company, it was established in 1996 with more than 19 years mass production experiences. if you have interest, don't be hesitate! Visit http://www.xccrfid.com/ and buy the card above by yourself.

Related Reading: contact PVC ID cards, contact oyster card, Blank contact card